Autoclaves Kettle

Autoclave autoclave to apply to fly ash, lime-sand brick, wall materials new light, aerated concrete block, concrete pipe and so on conservation autoclaved building products At present, the autoclave reactor used in addition to chemical, pharmaceutical, rubber and other industries, but also widely used in the construction of silicate products, wood, plaster, glass, insulation materials, textile workers, military and other fields of steam-cured products. At the same time, also widely used in autoclaves autoclave pressure steam curing the need for the production of the production process, such as: high-strength gypsum, cement pipe, high-strength glass, insulation materials, rubber and timber industries.
The horizontal steel autoclaves autoclave for, tube-type device, cylinder, kettle cover plate using 16MnR welding, neck kettle, kettle cover forging flange using 16Mn overall processing, weld in accordance with strict norms of X-ray detection. Activities at both ends for fast reactor doors open and chain with safety devices to open the door. The use of nitrile rubber autoclave double door seals, closed well. Support the activities of bodies set up under the kettle,adapt to the expansion and contraction of kettle body. The kettle has a safety valve, pressure gauge, steam trap and a sewage tank used for matching users.

characteristics of Autoclaves Kettle:

1 the structure of art, design reasonable, and the installation of a short cycle, low investment costs;
2 autoclave door professional rubber ring seal, easy to install, seal and long service life;
3 can be any pressure curve set by the computer-to-pressure curve for real-time tracking;
4 of the autoclave autoclave autoclave support for different body parts, set a fixed bearing, bearing activities, the end of three forms of special support. Better adapted to the expansion and contraction of kettle body to ensure that the autoclave reactor and the normal working life.
5 autoclave production reactor pressure vessel, strictly abide by national laws and regulations, standard design, manufacture, testing, design of advanced, therefore, reasonable structure, complete package.

Technical parameter:

Specification (m)	Maximal design pressure(mpa)	Actuating pressure(mpa)	Design the temperature(℃)	Working temperature(℃)	Service fluid	Type size(m)
Φ2×21	1.4	1.3	198.34	194.13	Saturated steam	22.12×2.6×2.973
Φ2×27	1.6	1.5	200	197	Saturated steam	28.12×2.6×3.211
Φ2×30	1.6	1.5	200	197	Saturated steam	31.12×2.83×3.211
Φ2.85×26	1.65	1.5	205	200	Saturated steam	27.4×3.595×4.504
Φ2.85×39	1.65	1.5	205	200	Saturated steam	40.4×3.595×4.504

Note: This specification is just for reference, any changes are subject to the products.